Download the correct table throw template before creating your artwork. Match your selected size and backside configuration, prepare your print-ready file, and upload it with your order.
Select the PDF template that matches your product selection. Templates are specific to the table throw size and whether the back is open or closed.
Choose the 4 ft, 3-sided template for an open-back table throw. Match this layout to the configuration selected in your order.
Download 4 ft Open-Back PDFChoose the 4 ft, 4-sided template for a closed-back table throw. Use its full dimensions when preparing your artwork.
Download 4 ft Closed-Back PDFChoose the 6 ft, 3-sided template for an open-back table throw. Keep important artwork within its designated printable area.
Download 6 ft Open-Back PDFChoose the 6 ft, 4-sided template for a closed-back table throw. Follow this configuration’s layout rather than adapting an open-back file.
Download 6 ft Closed-Back PDFChoose the 8 ft, 3-sided template for an open-back table throw. Build your design at the template’s exact dimensions.
Download 8 ft Open-Back PDFChoose the 8 ft, 4-sided template for a closed-back table throw. Check the size and configuration before exporting your file.
Download 8 ft Closed-Back PDFChoose carefully: A different size or backside configuration requires its matching template. Contact our team if you need help identifying the correct file.
The downloads above are PDF templates. Use the application suited to the template format you are working with. Final files must meet the print-ready requirements below.
Recommended for PDF templates.
Recommended for PSD templates.
Recommended for CDR templates.
Prepare your artwork to the exact dimensions of the selected template. Your exported file should contain only the graphics intended for printing.
Use the instructions for this product: Table throw artwork requirements may differ from those for other printed products. Follow the selected table throw template and contact SpeedE Transfers if anything is unclear.
Need help with your file? Contact SpeedE Transfers before submitting your artwork.
Choose the template matching your ordered size—4 ft, 6 ft or 8 ft—and your selected 3-sided open-back or 4-sided closed-back configuration.
An open-back template is for a 3-sided table throw, while a closed-back template is for a 4-sided table throw. Use the layout that matches your product selection.
Use the correct template rather than resizing another configuration. Your final artwork must match the dimensions of the selected template exactly.
Submit a single-page, flattened PDF or JPEG. PNG files are designated for DTF printing only and should not be used for this table throw artwork submission.
Prepare raster artwork at 150 DPI, using the exact dimensions of your selected table throw template.
CMYK is recommended for print production. Review your artwork’s color mode before exporting the final file.
No. The supplied requirements state that crop marks and bleed should not be included. Match the template dimensions exactly without adding extra space around the file.
Outline all fonts and flatten gradients and transparencies before submitting your final artwork.
No. Use the designated artwork layer while designing, then remove template guides and all nonprinting layers before exporting.
The maximum file size is 300 MB. Check your exported PDF or JPEG and verify its dimensions before uploading it with your table throw order.
Visit the Custom Printed Table Throws product page, select your size and backside configuration, and upload your print-ready artwork when ordering.
